manualshive.com logo in svg

NEC Versa 2700, User Manual

The NEC Versa 2700 User Manual is your essential companion for getting the most out of your device. With step-by-step instructions and detailed explanations, this manual provides valuable insights and troubleshooting tips. Download your free copy today from our website for seamless usage of your NEC Versa 2700.

Share
Download
background image

    

 2-10   Understanding the Software

QuickLink MessageCenter III

QuickLink MessageCenter III offers the following features:

„

Integrated voice mail, fax, and data communications

„

Customizable voice mailboxes

„

Incoming call routing and transfer

„

Call monitoring

„

Fax transmission (send/receive/schedule)

„

File transfer protocols

 See Chapter 4, “Using Your NEC Versa” for more
information about this application.

McAfee AntiVirus Software

 The McAfee AntiVirus software is installed to scan your
system for any virus infections. WebScan and VirusScan
are two scanning software tools included on the NEC
Versa 2700 Series system.

„

WebScan software protects your system against virus
infection from files attached to mail messages or from
files you download from the Internet. WebScan is acti-
vated any time you download executable and Microsoft
Word document files and scans mail through the Pega-
sus Mail system. Also included is the SPRY Mosaic
browser and the WebScan Web browser, which gives
access to the Internet.

„

VirusScan detects, identifies and disinfects known com-
puter viruses. It checks memory as well as both the sys-
tem and data areas of disks for virus infections. In most
cases, it will eliminate and fully repair infected programs
or system areas to their original condition.

Summary of Contents for Versa 2700
































































































































































































Reviews:

No comments

Related manuals for Versa 2700

Acer TravelMate 2000 Guía Del Usuario preview
TravelMate 2000
Brand: Acer Pages: 82
Gateway 200E Reference Manual preview
200E
Brand: Gateway Pages: 164
Acer TravelMate 3000 Manual Do Utilizador preview
TravelMate 3000
Brand: Acer Pages: 78
Schenker F516 Concise User Manual preview
F516
Brand: Schenker Pages: 124
Time Warner Cable SIERRA WIRELESS 250U 4G/3G LAPTOP CARD Quick Start Manual preview
SIERRA WIRELESS 250U 4G/3G LAPTOP CARD
Brand: Time Warner Cable Pages: 5
IBM THINKPAD THINKPAD A30 Service And Troubleshooting Manual preview
THINKPAD THINKPAD A30
Brand: IBM Pages: 88
iBall CompBook Excelance-OHD Manual preview
CompBook Excelance-OHD
Brand: iBall Pages: 18
Twinhead EM7355 User Manual preview
EM7355
Brand: Twinhead Pages: 57
Gateway P-172S Reference Manual preview
P-172S
Brand: Gateway Pages: 168
EUROCOM Notebook V12.3.10 User Manual preview
Notebook V12.3.10
Brand: EUROCOM Pages: 296
Panasonic Toughbook CF-M34NPFZPM User Manual preview
Toughbook CF-M34NPFZPM
Brand: Panasonic Pages: 32
NEC VERSA 2205C Manual preview
VERSA 2205C
Brand: NEC Pages: 89
NEC Packard Bell EasyNote M5 Disassembly Manual preview
Packard Bell EasyNote M5
Brand: NEC Pages: 28
NEC TCM380 Quick Start Manual preview
TCM380
Brand: NEC Pages: 47
NEC VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION Manual preview
VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION
Brand: NEC Pages: 4
NEC ShieldPRO FC-N21S Brochure & Specs preview
ShieldPRO FC-N21S
Brand: NEC Pages: 16
NEC ShieldPRO Quick Start Manual preview
ShieldPRO
Brand: NEC Pages: 20
NEC PB EasyNote M5 Disassembly Manual preview
PB EasyNote M5
Brand: NEC Pages: 30

Brands by name

Popular brands

Load more brands