manualshive.com logo in svg

NEC Versa 2700, User Manual

The NEC Versa 2700 User Manual is your essential companion for getting the most out of your device. With step-by-step instructions and detailed explanations, this manual provides valuable insights and troubleshooting tips. Download your free copy today from our website for seamless usage of your NEC Versa 2700.

Share
Download
background image

    

 Using Your NEC Versa    4-29

External Monitor

 You can add a standard external monitor to your NEC
Versa. You need a display signal cable (usually provided
with the monitor). One end of the cable must have a 15-pin
connector for the system.

 Follow these steps to connect an external monitor to your
NEC Versa.

1. 

Check that the NEC Versa is powered off and the
monitor power switch is turned off.

 

NOTE

The NEC Versa must be powered off or

suspended while the monitor is being connected.

2. 

Open the port cover on the back of the system.

 Connecting a monitor

3. 

Attach the 15-pin cable connector to the monitor port on
the system. Secure the cable connection with the screws
provided.

4. 

Connect the monitor power cable and plug it into a
properly grounded wall outlet.

 

Summary of Contents for Versa 2700
































































































































































































Reviews:

No comments

Related manuals for Versa 2700

Panasonic Toughbook 19 Using Manual preview
Toughbook 19
Brand: Panasonic Pages: 13
Panasonic Toughbook 19 Using preview
Toughbook 19
Brand: Panasonic Pages: 4
Panasonic CF-W5LWEZZBM User Manual preview
CF-W5LWEZZBM
Brand: Panasonic Pages: 36
Panasonic CF-SZ6 Series Operating Instruction preview
CF-SZ6 Series
Brand: Panasonic Pages: 112
Panasonic Toughbook 53 Operating Instructions Manual preview
Toughbook 53
Brand: Panasonic Pages: 40
Panasonic CF-W7 Series Read Me First preview
CF-W7 Series
Brand: Panasonic Pages: 192
Panasonic Toughbook CF-T7BWATAAM Operating Instructions Manual preview
Toughbook CF-T7BWATAAM
Brand: Panasonic Pages: 44
Panasonic Toughbook CF-F8EWDZZAM Supplementary Manual preview
Toughbook CF-F8EWDZZAM
Brand: Panasonic Pages: 20
Panasonic Toughbook CF-19CHBAXBM Brochure & Specs preview
Toughbook CF-19CHBAXBM
Brand: Panasonic Pages: 2
Panasonic CF-19K4RAX2M Operating Instructions Manual preview
CF-19K4RAX2M
Brand: Panasonic Pages: 40
Panasonic The Toughbook 52 Specification preview
The Toughbook 52
Brand: Panasonic Pages: 2
XMG P801 Service Manual preview
P801
Brand: XMG Pages: 23
Panasonic Toughbook CF-52EKMBDAM Brochure preview
Toughbook CF-52EKMBDAM
Brand: Panasonic Pages: 2
IBM 2635 Hardware Maintenance Manual preview
2635
Brand: IBM Pages: 132
Acer Aspire 5670 Service Manual preview
Aspire 5670
Brand: Acer Pages: 135
Fujitsu LifeBook B-2130 User Manual preview
LifeBook B-2130
Brand: Fujitsu Pages: 103
Fujitsu Lifebook B142 User Manual preview
Lifebook B142
Brand: Fujitsu Pages: 112
Fujitsu LifeBook B Series User Manual preview
LifeBook B Series
Brand: Fujitsu Pages: 120

Brands by name

Popular brands

Load more brands