1-10 Getting Started
NOTE
The default setting for the parallel port on
your NEC Versa is set to Enhanced Capabilities
Port (ECP). Some older parallel devices may not
function with the ECP default setting. You may need
to adjust the setting to accommodate your parallel
device. Follow the instructions in Chapter 3, “Using
Setup and Power Management,” to adjust the
setting.
Fan — Allows your system to cool properly and main-
tain a safe operating environment.
!
CAUTION
Do not block the fan while the NEC Versa is in use.
Serial Port — Use this port to connect a serial printer or
other serial device.
Monitor (Video) Port — Use this 15-pin port to attach
an external monitor to your NEC Versa. You can run the
LCD display and the external monitor simultaneously or
run either alone.
Expansion Port — Use this port to connect the NEC
PortBar 2700.
