NEC Univerge SV8100, Programming Manual

Page: 970 / 986

Issue 10.1 UNIVERGE SV8100
2 - 934 Program 92 : Copy Program
Description
(This program is available only via telephone programming and not through PC
Programming).
Use
Program 92-03 : Copy Program by Port Number
to copy extension and the
data of each outside line.
Conditions
None
Feature Cross Reference
None
Program 92 : Copy Program
92-03 : Copy Program by Port Number
Level:
IN
Input Data
Program Number XX-XX
Item
No.
Item Input Data
01
Source Number
Enter the port number from where the data is
to be copied.

For Trunk Base:
Trunk Port Number 1~200

For Trunk Group Base:
Trunk Group Number 1~100

For Extension Base:
Extension Number 1~512 (Extension
Include 768)

For Department Group Base:
Department Group Number 1~64

For DSS: (DSS Console Number 1~32
02
Destination Number (From)
Enter the first port number to where the
information is to be copied
03
Destination Number (To)
Enter the last port number to where the
information is to be copied. If the information
is to be copied only to one port, enter the
information entered in the Destination
Number (From) entry.