NEC Univerge SV8100, Programming Manual

Page: 495 / 986

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 459
Description
Use
Program 34-06: Add/Delete Digit for E&M Tie Line
to set digits that the system
should add or delete for Tie Lines.

Delete Digit
Some Tie Line networks pass the location number and extension number to the
remote side. This program allows the system to ignore such numbers for a call.
If individual extension users do not want to receive an incoming call, they could
delete all digits including the extension number.

Add Digit
If a Tie Line network requires additional digits to reroute the call to a location, the
digits for the location can be added to the received digits.
Conditions
None
Feature Cross Reference

Tie Lines
Program 34 : Tie Line Setup
34-06: Add/Delete Digit for E&M Tie Line
Level:
IN
Input Data
Incoming Trunk Group Number 001~100
Item
No.
Item Input Data Default
01
Delete Digit
0~255 (255 = delete all digits) 0
02
Additional Dial Digits
Up to four digits (0~9,

,
#
) No Setting