NEC Univerge SV8100, Programming Manual

Page: 345 / 986

Programming Manual 2 - 309
Program
21
Description
Use
Program 21-01 : System Options for Outgoing Calls
to set the system
options for Outgoing Call Service.
Program 21 : Outgoing Call Setup
21-01 : System Options for Outgoing Calls
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
Program
01
Seizure Trunk Line Mode
Select the trunk based off the Trunk
Route Priority (0) or based off the
trunk that has not been used in the
longest time (1).
0 = Priority
Route
1 = Circular
Route
0 14-05
14-06
02
Intercom Interdigit Time
When placing Intercom calls,
extension users must dial each digit in
this time.
0~64800 (sec) 10
03
Trunk Interdigit Time (External)
The system waits for this time to
expire before placing the call in a talk
state (Call Timer starts after time
expires, Voice Over and Barge-In are
not allowed until after time expires).
0~64800 (sec) 10 14-02-08
04
Dial Tone Detection Time
If dial tone detection is enabled, the
system waits this time for the Telco to
return dial tone. When the time
expires, the system assumes dial tone
is not present. To disable this time
(and have the system wait
continuously), enter 0.
0~64800 (sec) 5 14-02-05