NEC SV8300, Pc Programming Manual, Page: 223 / 232

Appendix C Troubleshooting
C-11
NWA-033628-001 Rev.1.0
Quick Setup
Error Message Cause Remedial action
A file transfer error occurred. Do
it again from the beginning. An error occurred transfer-
ring a file. Retry from the beginning.
FTP server has a problem.
Confirm the following items, and
do it again from the beginning.
• If another FTP Server being
active on a PC, stop for it.
• Confirm selecting the Menu
item [Tools] > [Configuration]
> [FTP Server].
The FTP server is at fault. Shut down the FTP server once
and the retry.
Couldn’t return the IP Address to
default because that LAN cable
is unplugged or Network Con-
nection is in an invalid state. – Connect the PC LAN cable and
check the status of network con-
nectivity.
The original IP address could not
be restored. – Restore the IP address manually.
The original IP address is stored
the following file.
<INSTALL folder> ¥ UserDB ¥
Program ¥ Upgradeoffline-IP
Address. txt
Error Message Cause Remedial action
Failed to clear all the system
data. Confirm the SENSE SW of
CPU blade, and do it again. System data all clear failed. Check that the [SENSE] switch
on the CPU blade is set to E and
then retry.
Failed to back up the system
data.
Please try again later. Backup of system data saved
on the SV8300 failed. Retry the system data backup.
Page 2-16
Failed to back up the system
data, and do it again. Backup of system data failed
following its all clear. Wait for a while before retrying
the system data backup.