NEC SV8300, Pc Programming Manual, Page: 119 / 232

Chapter 4 Standard Mode
4-73
NWA-033628-001 Rev.1.0
[Maintenance] Category
STEP4: Click the [OK] button.
You are directed back to the [System Configuration Display] screen. The item that has been
selected in Step 3 is displayed in the Read Item field.
STEP5: Click the [Read] button.
The browser lanches to display the System Configuration Info Report.
System configuration information has now been displayed.
No. Item Description
(1) “System Configura-
tion” check box Check to read out the following system configuration information
(default: checked):
• Outline information of system
• License information
• IP Address of unit
• Status of Blade
(2) “Detailed of Blade”
check box Check to read out firmware information about the blades mounted in the
SV8300 and the status of system data (blade type) registration (default:
checked).
* When this check box is checked, “System Configuration” check box is
automatically checked.
(3) “Port” check box Check to read out the station numbers/trunk numbers registered in the
physical port and the status of utilization (default: checked).
* When this check box is checked, “System Configuration” check box
and “Detailed of Blade” check box are automatically checked.
(4) Virtual port Check to read out the station numbers/trunk numbers registered in the
virtual port and the status of utilization (default: checked).