NEC SV8300, Pc Programming Manual, Page: 160 / 232

Chapter 5 System Data Mode
5-16
NWA-033628-001 Rev.1.0
Using System Data Mode
SETTING DATA
REMARKS
DATA MEANING
A231 Station Authorization Code/Password Change
A232 Pad Lock Set by Station Authorization Code
A233 Pad Lock Reset by Station Authorization Code
A234 Call Pickup-Group (Pilot)
A239 IP Station Logout
A241 Call Forwarding-Logout/Call Forwarding-PS/Wireless
Telephone Out of Cell (Zone) Set
A242 Call Forwarding-Logout/Call Forwarding-PS/Wireless
Telephone Out of Cell (Zone) Cancel
A243 System Speed Dialing origination (1-8 digits abbreviated
Code: depends on CM42>77)
A256 Mobility Access Mode Set
A257 Mobility Access Mode Cancel
A258 PS Location Search For PS Location Display (Multiline Terminal
LCD)
100
163
Trunk Route 00
Trunk Route 63
Data is to be assigned for Trunk Routes corre-
sponding to the access codes for outgoing trunk
calls (COT, LDT, ODT, etc.).
200
231
Route Advance Block 00
Route Advance Block 31
Data is to be assigned in the following two
cases; there are two or more trunk routes for
outgoing call, and for determining the seizing
order of the trunk route.
300
323
Tenant Block 00
Tenant Block 23
Data is to be assigned when the purpose and
method of the same access code varies with
each tenant.
500
515
Kind of Special Terminal Block 00
Kind of Special Terminal Block 15
Data is to be assigned when the purpose and
method of the same access code varies with
each special terminal (single line station).
~ ~ ~
~ ~ ~
~ ~ ~
~ ~ ~