NEC SV8300, Pc Programming Manual, Page: 218 / 232

Appendix C Troubleshooting
C-6
NWA-033628-001 Rev.1.0
Continued on next page
Error Message Cause Remedial action
Errors of communication with
the System occurred.
Confirm the conditions of con-
nection. – Check the status of communica-
tion with the system.
Connect to System. There was no connection
with the system when an
attempt was made to read or
write to and from the system. Check the connection with the
system.
Enter xx Number into the first
line. xx number has not been
entered as a starting line
number.
xx number = Station number,
Trunk number, CS/ZT num-
ber, etc. Enter xx number as a starting
line number and then click the
[Fill In] button.
Some data is invalid in the first
line. Invalid data exists on the
starting line. Check the data on the starting
line and then click the [Fill In]
button.
The data xx has already been reg-
istered. – Data xx is already registered.
Take either of the following
actions as appropriate:
1. Check the data.
2. Delete the data once and then
register it again.
The data xx is not registered. – Register data xx first.
Failed to apply the data. – Retry.
Failed to register the data. – Retry.
Failed to read the data. – Retry.
Enter the data. Required data has not been
entered. Enter the wanting data.
No data has been registered. – Register data first.
Some data could not be regis-
tered. – Retry.