NEC SV8300, Pc Programming Manual, Page: 214 / 232

Appendix C Troubleshooting
C-2
NWA-033628-001 Rev.1.0
Troubleshooting a Connect Failure
To begin with, check the following items:
If a link still cannot be established after all these checks, proceed to checks of connection method.
• IP connection Page C-3
• RS-232C connection (direct connection) Page C-4
• Modem connection Page C-4
Point to check Corrective action
Is the SV8300 active? If the SV8300 is inactive, turn it on, then back on.
For more details, refer to the “System Hardware Manual”.
Is the cable between PCPro and the
SV8300 (or modem) connected prop-
erly? If the cable is not connected properly, reconnect it.
Page 2-6
Has a valid connection account been
selected? If a connection account from the connection method has been
selected, select the connection account associated with the
connection method in the [Connect] screen.
Page 2-12
Is the PCPro going to connect the link
between SV8300 and PCPro soon, after
disconnecting the link? It takes a few seconds to reconnect the link between the
SV8300 and PCPro. Reconnect the link after few second.