manualshive.com logo in svg

NEC SuperScript 1400, User Manual

Share
Download
NEC SuperScript 1400 User Manual Download Page 34

28

Chapter 4, The Operator Panel

Paper Jam

The 

Paper

 LED is lit and the 

Error 

LED is 

blinking.

There is a paper jam in the printer. Check the 
Status Monitor on your screen (if available) for 
jam location.

Paper Size Error

The 

Paper 

LED and the 

Error 

LED are both 

blinking.

The printer detects a paper size mismatch.

Memory Overflow Error

The 

Error 

LED is blinking.

The document is too complex, and the printer 
does not have enough memory to print the job.

Cover Open/No Toner Cartridge

The 

Error 

LED is steady.

Either a cover is open or there is no Toner 
Cartridge in the printer.

Mode

Message

Internal Error

All four LEDs blink sequentially and fast.

The printer detects an internal error (i.e., 
memory link crash). 

Engine Error

All four LEDs blink sequentially and fast.

The printer detects an engine error (LSU or 
Fuser). 

Mode

Message

Summary of Contents for SuperScript 1400














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands