6
Connection
When using LAN, after finishing the “Connection/Setting” in this chapter, refer to the “LAN Connection/Setting” (page 14).
Preparation
In order to use the Media Player to display the program on the Display, the enclosed authoring software, a computer, and a USB memory
(if the program is distributed using USB memory ) are required.
Authoring software
The authoring software is on the enclosed CD-ROM. Install the authoring software on your computer when using it for the first time. Refer to the
authoring software User’s Manual for the installation procedure.
USB memory
Encoded USB memory cannot be used.
Connection when using USB memory to distribute programs
1.
Insert the attached memory card into the memory card connector. (Page 2)
CAUTION:
Insert the memory card with the label
side up. Check to make Sure that the
write protect switch in riot in the look
position.
2.
Attach the Media
Player to the display.
3.
Insert a USB cable extension into the USB
connector.
(When the program is distributed using a
USB memory )
USB extension cable
Remote control enclosed
with the display
