NEC Quadro K5000, User Manual

Page: 58 / 85

１５
(6)
Connect the proper connector from power supply unit to the PCI-Express external power
connector (6-pin) on Quadro K5000 card. If the proper connector is not provided with the
power supply unit of the workstation, connect the 6-pin side of PCI-Express external power
cable, and connect a power cable of workstation to 4-pin connector.
If the number of power cables provided with workstation is insufficient, use the power branch
cable.
※If the cable length is too long, bundle it so that the connector does not contact with metal
part, or the cable is not caught by fan or metal plate.
※Route the PCI-Express external power cable and SATA cable for connecting with HDD or ODD,
as shown in the figure below.
PCI-Express external power cable
Connect to PCI-Express external
power connector on Quadro K5000 Connect with power cable of
workstation
Connect the male connector to
power connector on workstation.
The female connector can be used
similarly as an ordinary power
connector.
Power branch cable
PCI Route the PCI-Express external
power cable so that it passes over the
Quadro K5000.
Route the SATA cable for connecting
with HDD or ODD so that it passes below
the retainer of Quadro K5000, and
connect it with the device.