NEC Quadro K5000, User Manual

Page: 49 / 85

６
Thank you for purchasing our graphics accelerator Quadro K5000.
The Quadro K5000 is designed exclusively for CAD or OpenGL application related to image
display that works on NEC Express5800 Series workstation. The Quadro K5000 is a graphics
accelerator card that allows rapid graphics drawing by onboard graphics accelerator chip
Quadro K5000. The Quadro K5000 can work on Microsoft Windows 7 and Microsoft Windows 8.
Read this User's Guide thoroughly to fully understand handling of the Quadro K5000 and
appreciate its functions to the maximum extent.
(1) This manual describes how to use the graphics accelerator Quadro K5000.
For any other devices, refer to the relevant manual.
(2) No part of this manual may be reproduced in any form without the prior written permission
of NEC Corporation.
(3) The contents of this manual may be revised without prior notice.
(4) The contents of this manual shall not be copied or altered without the prior written
permission of NEC Corporation.
(5) Keep this manual in a safe place for quick reference at anytime necessary.
(6) All efforts have been made to ensure the accuracy of all information in this manual. If
you notice any part unclear, incorrect, or omitted in this manual, contact the service
representative where you purchased this product.
(7) NEC assumes no liability arising from the use of this product, nor any liability for
incidental or consequential damages arising from the use of this manual regardless of
Item (6).
Microsoft, Windows, Windows 7, Windows 8, MS– DOS are registered trademarks or trademarks
of Microsoft Corporation in the United States and other countries.
Quadro
is a trademark of nVIDIA Corp.
OpenGL is a trademark of Silicon Graphics, Inc.
All other product, brand, or trade names used in this publication are the trademarks or
registered trademarks of their respective trademark owners.
Preface
Notes:
Trademarks