NEC Quadro K5000, User Manual

Page: 78 / 85

３５
5.7 Restrictions on Feature
Standby/Hibernation of System
・While using a graphics application using OpenGL, the system cannot enter Standby/Hibernation
mode.
Change connection of monitor
・Connection of monitor cannot be changed while Mosaic is being used. If changed, the screen
display may become abnormal. In this case, restore the original connection.
・Changing connection of monitor during power-on state is not supported. Doing so may cause
a failure.
5.7.1 Restrictions on UEFI mode of Windows 8
・In UEFI mode of Windows 8, no display may appear on monitor via Display-Port connection if
graphics driver is not applied. In this case, use the other monitor than Display-Port connection
(e.g., a monitor via DVI connection or DVI connection using DP to DVI connector).
・In UEFI mode of Windows 8, no display may appear on monitor and the system becomes inoperable
at the next startup if the system is shutdown with graphics driver not applied. In this case,
press the Power switch for a long time to forcedly shutdown the system. To avoid this situation,
restart the system, or perform [Power off PC] by following procedure instead of [Shutdown].
Click [Settings] → [Power] on Charms bar, click [Restart] while pressing the <Shift> key,
and select [Power off PC].
If the problem persists, turn off the following settings on Control Panel.
Select [Control Panel] → [Power Option] → [Setting of Power Button] → [Setting of
Shutdown] and uncheck to [Enable Fast Startup (Recommended)].