NEC Quadro K5000, User Manual

Page: 57 / 85

１４
※If the DIMM slots are located near the PCI-Express x16 slot, make sure that the lock levers
of DIMM are surely raised.
※If the PCI-Express x16 slot has locking lever, connect the card carefully not to damage the
locking lever.
(5) After making sure that the card is firmly inserted, secure the Quadro K5000 with the screws
or fixing jig you have removed in earlier steps.
Make sure that you can see the Display-Port connector and the DVI-I connector clearly when
viewed from rear of the workstation.
CAUTION
Do not apply an excess force
If it is hard to connect the card, remove it once, and then connect it again. Applying
excess force to card may cause a damage to the card.
Do not apply force to the components on the card (e.g., heat sink and capacitor) when
connecting the card.
DIMM locking lever
PCI-Express x16 slot locking lever
Display-Port connector
DVI-I connector