NEC Quadro K5000, User Manual

Page: 56 / 85

１３
2.2 Installing the Card
(1) After making sure that workstation and peripheral devices are turned off, unplug the power
cord of the workstation.
(2) Remove the top cover from the chassis according to the User's Guide of the workstation.
(3) Remove the back panel cover (fixing screw or fixing jig) from the PCI-Express (x16) slot,
and remove the back panel or PCI-Express card.
※The PCI-Express slot of workstation may have card locking mechanism in addition to fixing
screw/fixing jig.
※Pay strict attention to remove the double-width card because the locking mechanism cannot
be seen directly. Applying excess power may cause damage to the lock lever.
(4) Insert the PCI-Express card edge connector of Quadro K5000 into PCI-Express x16 slot on the
workstation so that the card can be connected firmly.
CAUTION
Pay attention to hot surface
Immediately after the workstation is turned off, its internal components and
PCI-EXPRESS card are extremely hot. Make sure that they are fully cooled down before
removing the card.
Connect the card while aligning the
retainer with fixing rail.
Insert the PCI-Express card edge
connector into PCI-Express x16 slot on
the workstation so that the card can be
connected firmly.