NEC Quadro K5000, User Manual

Page: 47 / 85

４
Installation, storage, and connection
CAUTION
Do not install or store the product in any place other than specified.
Do not install the product in the following places or any place other than
specified in the User's Guide of workstation. Failure to follow this
instruction may cause a fire.
・A dusty place.
・A humid place such as near a boiler.
・A place exposed to direct sunlight.
・An unstable place.
Do not use the product in an environment where corrosive gas is present.
Do not install or use the product in a place subject to corrosive gases
including sodium chloride, sulfur dioxide, hydrogen sulfide, nitrogen
dioxide, chlorine, ammonia, or ozone. Do not install the product in an
environment that contains dust, chemicals that accelerate corrosion such
as NaCl or sulfur, or conductive materials. Failure to follow this warning
may cause the wiring on the printed board to short-circuit, leading to
fumes, fire or malfunction. If you have any questions, contact the store
where you purchased the product or a maintenance service company.
Disconnect the power plug before installing this product or
connecting/disconnecting an interface cable.
Be sure to disconnect the power plug of the workstation from a power outlet
before connecting/disconnecting this product and interface cables.
Touching any internal device of the workstation with its power cord
connected to a power source may cause an electric shock or a fire resulted
from a short circuit even if the workstation is off-powered.
Do not use any unauthorized interface cable.
Use only the interface cables specified by NEC. Locate a proper device
and connector before connecting a cable. Using an unauthorized cable or
connecting a cable to an improper destination may cause a short circuit,
resulting in a fire. Also, observe the following notes on using and
connecting an interface cable.
・Do not use any damaged cable connector.
・Do not step on the cable.
・Do not place any object on the cable.
・Do not use the workstation with loose cable connections.
・Do not use any damaged cable.
Secure the interface.
Be sure to lock the video cable, conversion connector, and other
interfaces. Contact failure might cause a fumes or fire.