3-28 Option Installation
NOTE:
The device rails are labeled A and B and
are not interchangeable. If the rails prevent the
device from aligning properly in the system,
reattach the rails on the opposite sides of the
device.
If you are installing an accessible device (diskette drive, tape drive, or CD-ROM
reader), attach the rails to the device so that the front of the device extends
beyond the chassis and is even with the blank panels on the front of the system.
Figure 3-23 Attaching the Device Rails
4.
Insert the device into the device slot from the front of the system unit, connector
end first.
5.
Align the rails with guides in the selected slot. Push the device into the slot until
the rails lock in place.
Figure 3-24 Inserting the Device
Summary of Contents for POWERMATE PRO150
Page 152: ...A 16 Connector Pin Assignments ...
Page 160: ...B 8 System Board Settings ...