![background image](http://html.mh-extra.com/html/nec/powermate-pro150/powermate-pro150_manual_248704060.webp)
PowerMate Pro150 System
4-11
Removing Standard Slot Covers
1.
Observe the precautions in “Before You Begin.”
▲
▲
!
CAUTION
Be careful to not damage components on the system board
or add-in boards when doing this procedure. You may
need to remove add-in boards that are next to the slot cover
you want to remove.
2.
Remove the expansion slot screw from the top of the slot cover
(Figure 4-6). Lift the cover up and out. Save the slot cover in case you
remove the board later.
OM04178
Figure 4-6. Removing a Standard Expansion Slot Cover
Summary of Contents for POWERMATE PRO150
