6-12
Solving Problems
Error and Information Messages
Error Message
Explanation
Address Line Short!
Error in the address decoding circuitry on
the motherboard.
Cache Memory Failure, Do Not Enable
Cache!
Cache memory is defective; the CPU has
failed. Call for service.
CMOS Battery Failed
CMOS RAM is powered by a battery. The
battery power is low. Replace the battery.
CMOS Checksum InvaIid
After CMOS RAM values are saved, a
checksum value is generated for error
checking. The previous value is different
from the current value. Run Setup.
CMOS System Options Not Set
The values stored in CMOS RAM are either
corrupt or nonexistent. Run Setup.
CMOS Time and Date Not Set
Run Setup to set the date and time in
CMOS RAM.
Diskette Boot Failure
The boot disk in floppy drive A: is corrupt. It
cannot be used to boot the system. Use
another boot disk and follow the screen
instructions.
DMA Controller Error
Error in the DMA Controller.
Drive Not Ready Error
The BIOS cannot access the floppy drive.
Check all the appropriate connections after
the system is powered down.
Continued
Summary of Contents for POWERMATE PRO150
