1-2
Product Description
•
AMIBIOS in a flash memory device supports system setup and PCI
auto-configuration
•
Expansion slots for up to six add-in boards
−
Three dedicated PCI slots
−
Two dedicated ISA-bus slots
−
One "combination" slot for either a PCI or an ISA add-in board
•
180 watt continuous (200 watt peak) power supply switch-selectable for
115 and 230 V ac operation
•
Two RS-232C-compatible 9-pin serial connectors
•
One multimode, 25-pin Centronics®-compatible parallel port
•
Two peripheral bays:
−
One bay that holds up to three 3.5-inch drives (one externally-
accessible, two internal access only)
−
One externally accessible bay for installing 5.25-inch drives (up to
three half-height drives or one half-height plus one full-height drive)
•
One 1.44 MB, 3.5-inch high-density diskette drive installed
•
PS/2®-style keyboard and mouse connector
•
Speaker mounted on the chassis
•
Password protection and padlock slot for system security
Most models include a:
•
1.6 GB IDE hard disk drive installed
•
Six-speed CD-ROM reader installed
•
Pair of external speakers
•
Microphone
•
Graphics controller card installed
•
Audio/sound card installed
•
SCSI interface card installed.
Some models include additional cards and peripherals.
Summary of Contents for POWERMATE PRO150
