Connecting the Voice Mail to a Phone System
Connecting to the i-Series Phone System
10
◆
NVM-2e/i-Series Quick Setup Guide
Chapter 2: Installing the Voice Mail
Connecting the Vo ice Mail to a Phone System
Connecting to the i-Seri es Phone System
Connecting the Voice Mail to the i-Series Phone System
To connect the NVM-2e to the i-Series Phone System:
1.
Plug one end of a modular line cord into Port 1 on the NVM-2e.
Plug the other end into an analog station port or a port on a 2-OPX Module, as
shown in Figure 6.
2.
Repeat step 1 for Port 2.
3.
Repeat step 1 for Ports 3 and 4 if your Voice Mail contains 4 ports.
.
Figure 6: Connecting an i-Series Phone System to the NVM-2e
Availability:
All versions of the NVM-2e integrate with the i-Series.
IMPORTANT NOTE
Extensions will receive notification of new messages (blinking Message Waiting Lights
and interrupted dial tone for single line phones) only if Voice Mail Port 2 is connected
to the phone system.
1
2
24 VAC
0.7A 50-60Hz
IOIOI
NVM2exVB-C6
AC Adapter
AC Power Cord
Port 2
Port 4
Port 1
Port 3
To Analog Station Port
or
a Port on a 2-OPX Module
To Analog Station Port
or
a Port on a 2-OPX Module
