NEC NP1000, User Manual

Page: 12 / 1169

2
1. Introduction
���
Introduction to the Projector
This section introduces you to the NP2000/NP1000 projector and describes key features and controls.
Congratulations on Your Purchase of the Projector
The NP2000/NP1000 is a sophisticated XGA projector that produces an enhanced display. With the NP2000/NP1000
you will be able to project images up to 500" (measured diagonally). Enjoy crisp and sharp large screen display from
your PC, workstation or Macintosh computer, DVD player, VCR, satellite hookup, HDTV source, ) and images from
your digital camera PC Card, compact flash memory or USB storage device. The NP2000/NP1000 provides for
enhanced security options to help deter projector theft and provides for full projector control through the PC control
port (D-Sub 9 Pin) and LAN support. With input and output flexibility, long lamp life and a full function remote, the
NP2000/NP1000 lets you enjoy larger than life viewing from a compact and easy to setup and use projector.
Features you’ll enjoy :
• LCD projector with high resolution and high brightness
High resolution display - up to UXGA compatible, XGA native resolution.
• Extensive optional lens
One standard lens and five types of optional lenses are available
• Lens shift mechanism offers installation flexibility
Manual lens shift that can be adjusted by turning dials on the top of the projector
• Direct Power Off & Auto Start
The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even
when projecting an image) using a power strip equipped with a switch and a breaker.
NOTE: Before using Direct Power Off, be sure to allow at least 20 minutes immediately after turning on the projector and
starting to display an image.
Also, the power cable can be removed immediately after turning off the projector.
Auto Start eliminates the need to always use the POWER (ON/STANDBY) button on the remote control or projec-
tor cabinet.
• Integrated RJ-45 connector for wired networking capability and wireless networking capable
Present from anywhere in the room when using as a wireless LAN projector and five software contained on the
supplied User Supportware 3 CD-ROM, no physical signal cable connection to a PC is required.
* The NEC optional wireless LAN card is required (NWL-100* See page
89 ).
• A variety of input ports and a comprehensive array of system control interfaces
This projector supports input signals including BNC, DVI-D, analogue RGB, component, S-video, and compos-
ite.
• Wall Color Correction
Built-in Wall Color Correction presets provide for adaptive color correction when projecting onto non-white
screen material (or a wall).
• Six picture preset modes for user adjustable picture and color settings
Each picture preset mode can be customized and memorized according to your preference.
• Preventing unauthorized use of the projector
Enhanced smart security settings for password protection, cabinet control panel lock, menu lock and PC card
protection key to help prevent unauthorized access, adjustments and theft deterrence.