NEC NECCare Platinum Express5800/A1160, Troubleshooting Manual

Page: 43 / 52

Configuration Procedures
5-15
used. To eliminate all browser startup warnings, use custom SSL certificates for each
partition and cell Web interface, as follows:
1. Navigate to the SSL certificate page of the of the partition remote console interface
or cell.
2. For New X509 Certificate in PEM format , browse to the location of the file
containing the desired signed certificate.
3. For New Private RSA Key in PEM format , browse to the location of the file
containing the desired custom SSL key.
4. Click Load .
The new values are loaded to the boot cell and displayed as the current values on
the Web page.
The new certificates are not loaded to other cells in the partition or to other partitions. If
you change the boot cell for the partition, you must load the SSL certificates again.
Because SSL certificates contain the Web server MLAN address, you must regenerate
them any time the MLAN address changes for a partition or cell. Each MLAN address
requires unique certificates.
5.3.8. Configuring Alerts and the SMTP Server using Remote console
interface
Management firmware can generate alerts from sensor readings, events, and faults.
Management firmware can send notifications of alerts using email or SNMP traps, as
described in the
User’s Guide .
If you want to send alert notifications using e-mail, you must first configure the Simple
Mail Transfer Protocol (SMTP) server before configuring any email alerts.
Configuring the SMTP Server using Remote console interface
If you plan to send alert notifications using email, first configure the SMTP server before
configuring any e-mail alerts, as follows:
1. Navigate to the alert management page on the partition remote console interface.
2. Click SMTP Settings .
The SMTP server address page appears, as shown in Figure 5-8 .