2-1
Section 2
Upgrading the Service Processor
This section provides information on how to upgrade your Service Processors to a new
level.
Note: You cannot reload the same level of software on to your Service Processor.
2.1. Checking Management Firmware Level using Remote
console interface
Check the management firmware level on the Service Processors for the partition, as
follows:
1. Log on to the partition remote console interface, as follows:
a. Open a browser on a management server or connected workstation.
b. Type the maintenance LAN (MLAN) address of the partition in the browser
address box.
Note: The MLAN address is the IP address of the partition.
A log-on dialog box appears.
c. Type a valid user name and password, and click
Log
On
.
Management firmware authenticates the credentials and then displays the
summary page for the partition.
2. Click
Firmware Update
in the left column.
The firmware update page appears, as shown in
Figure 2-1
.
Summary of Contents for NECCare Platinum Express5800/A1160
Page 1: ...EXPRESS5800 A1160 Service Processor Troubleshooting Guide...
Page 10: ......
Page 52: ...456 01807 000...