Configuration Procedures
5-7
You can update network settings in response to changes in your site configuration,
unless a DHCP server is enabled and IP addresses are assigned automatically. To
update settings
1. Open the desired partition or cell menu.
2. Navigate
to
Network
and press
OK
.
The network menu for the partition or cell opens.
3. Navigate
to
Update Settings
and press
OK
.
The EXPRESSSCOPE® Monitor LCD displays a message that the settings are
reserved for you to update, as shown in
Figure 5-1
.
Figure 5-1 Settings Reserved
Other client applications that attempt to update the settings receive a message that
these settings are reserved. Well-behaved clients, such as the EXPRESSSCOPE®
Monitor interface and the remote console interface, do not change reserved settings.
However, other client applications are not precluded from changing these settings.
Changes made by any client applications appear on the LCD.
4. Press
OK
to continue updating settings.
An expanded network menu appears, as shown in
Figure 5-2
.
Summary of Contents for NECCare Platinum Express5800/A1160
Page 1: ...EXPRESS5800 A1160 Service Processor Troubleshooting Guide...
Page 10: ......
Page 52: ...456 01807 000...
