NEC NEAX IPS, Installation Manual

Page: 86 / 180

CHAPTER 3 BASICOPERATIONS AND VARIOUS EXPLANATIONS
– 76 –
NWA-008869-001 Rev.1.0
atch3001.fm
MEMO:
If, after entering all characters of a command, you want to display command candidates with
the [Tab] key, first press the [Space] key to indicate that you have entered all characters of the
command and then press the [Tab] key. If you do not press the [Space] key to delimit the com-
mand, the command candidates that begin with the entered characters will be listed.
Entering an abbreviation of a command
If there is only one command that begins with the entered characters, you can enter the command simply
by pressing the [Enter] key.
For a command consisting of several words, you can enter an abbreviation of each word, provided that
word can be abbreviated. Delimit each word abbreviation with a space.
In the following example, the write memory command is entered with abbreviations of the respective
words.
Help functions
The [?] key can display a list of command explanations.
Pressing the [?] key displays a list of explanations of the commands or parameters that are available in that
state.
Router (config
−
Ethernet0.0) # ip
ip
− −
IPv4 interface subcommands
ipsec
− −
IPSec configuration commands
ipv6
− −
IPv6 interface subcommands
Router (config
−
Ethernet0.0) # ip
access
−
list
− −
Configure access lists
cache
−
size
− −
Configure routing cache table size
dhcp
− −
Configure DHCP server
( Omitted )
Tab
Tab
If the Space
key is pressed
If the Space
key is not
pressed
Space
Router # en
Router (config) #
Enter
Router (config) # wr m
Router (config) #
Enter
KEY OPERATIONS AND SCREEN DISPLAYS