NEC NEAX IPS, Installation Manual

Page: 83 / 180

CHAPTER 3 BASICOPERATIONS AND VARIOUS EXPLANATIONS
– 73 –
NWA-008869-001 Rev.1.0
atch3001.fm
KEY OPERATIONS AND SCREEN DISPLAYS
During command entry, you can use the cursor movement, character deletion, command entry assist, and
help functions.
Moving the cursor
On the command line, you can move the cursor to the right and left.
Editing characters on the command line
In combination with the cursor movement functions, you can use the following functions to edit (delete
and replace) the desired characters on the command lines.
Moves the cursor one character to the left.
Moves the cursor one character to the right.
Moves the cursor to the beginning of the line.
Moves the cursor to the end of the line.
Ctrl + b , or
Ctrl + f , or
Ctrl + a
Ctrl + e
Ctrl + b , or (Move one character to the left)
Ctrl + a (Move to the beginning of the line)
Ctrl + f , or (Move one character to the right)
Ctrl + e (Move to the end of the line)
Router # enable
−
config
Router # enable
−
config
Router # enable
−
config
Router # enable
−
config
Router # enable
−
config
Deletes the single character to the left of the cursor.
Deletes the single character at the cursor position.
Replaces the character at the cursor position with the preceding one.
Deletes all characters ranging from the cursor position to the end of the line.
Deletes all characters on the command line.
Back Space
Ctrl + d
Ctrl + t
Ctrl + k
Ctrl + c
KEY OPERATIONS AND SCREEN DISPLAYS