CHAPTER 3
NDA-24219
Page 22
Revision 2.0
1.3
Removing/Inserting Circuit Cards
When removing a circuit card from the PIM or when inserting a circuit card in the PIM, follow the procedure in
Table 3-1 Removing/Inserting Circuit Cards Procedure
CIRCUIT CARD
PROCEDURE
CONDITION
INSERT
REMOVE
•
PN-CP03 (MP)
•
PZ-PW86 (PWR)
•
PZ-PW112 (PWR)
•
PN-PW00
Power off
↓
Insert
↓
Power on
Power off
↓
Remove
↓
Power on
Always insert or remove these circuit cards
with power off to prevent damage to the card
or other system circuitry.
•
PN-AP00 (AP00)
•
PN-ME00 (EXTMEM)
•
PN-BRTA (BRT)
•
PN-BS00-B (BS00)
•
PN-BS01-B (BS01)
•
PN-CK00 (PLO)
•
PN-24DTA-A (DTI)
•
PN-4RSTB (MFR)
•
PN-4RSTC (CIR)
•
PN-SC00 (CCH)
•
PN-SC01 (DCH)
•
PN-SC02 (ICH)
•
PN-SC03 (ICH)
•
PN-SC03 (CSH)
•
PN-VM00
Power off or
MB switch on
↓
Insert
↓
Power on or
MB switch off
Power off or
MB switch on
↓
Remove
↓
Power on
Always insert or remove these circuit cards
under Make Busy condition or power off to
prevent damage to the card or other system
circuitry.
•
PN-AP01 (AP01)
•
PN-CC00 (ETHER)
Refer to the OAI System Manual.