NEC NC2041L, Installation Manual

Page: 41 / 108

51
Setting Up Your Projector
WARNING
• The power supply unit handles large electrical currents. To maintain safety, use wires with the specifications as shown in
the following table, and affix to the terminals at the designated attachment torque.
• Always use solderless terminals with the dimensions as shown in the following diagram.
• The use of parts with dimensions other than as designated creates a risk of the AC power supply unit short circuiting due
to the terminal block generating heat and melting because the terminal block of the light power supply unit cannot be
attached correctly.
• Power supply terminal L, N (Black)
JIS IEC/EN UL CSA
Thickness of compatible wiring
(using solderless terminal)
14mm
2
14mm
2
AWG6 or
AWG8 AWG6 or
AWG8
Solderless terminal dimensions M5 x 10
Tightening torque 2.0 to 2.5N·m
Solderless terminal dimensions
Min 1.0
Min 1.0
-Max 2.0
-Max 2.0
Max 5.8
Min
φ
6.1
Max 12.2
Min 4.5
Unit: mm
Solderless terminal recommended
part (J.S.T parts)
Model R8-5 When using AWG6: Model R14-5
When using AWG8: Model R8-5
J.S.T: J.S.T. Manufacturing Co. Ltd.