NEC NC2041L, Installation Manual

Page: 88 / 108

113
LCD Menu
[Security Key]
This function cannot be used in this device.
[USB Update]
Use the function to install software or data for the main body by using the USB flash drive in which a release package for
updating the main body or a backup file for the main body is saved. For details, refer to the service manual.
←
Pressing the ENTER button executes this function.
4-3-6. Memory
This menu is the service personnel menu. For the using service personnel menu, refer to “4-1-1. When You Use the Service
Personnel Menu” (page 100).
The selected lens memory (lens adjustment value) and the content of the light memory (light output power value) can be
overwritten with the current settings. Press the LEFT/RIGHT buttons to select the light memory or the lens memory then press
the “ENTER” button to display the confirmation screen. Select “Yes” in the confirmation screen, and then press the ENTER
button. The selected memory (light memory or lens memory) is overwritten with the current settings.
NOTE
Lens memory and light memory cannot be newly registered. Use DCC to register the lens memory and light
memory in advance. Refer to “Digital Cinema Communicator v2 Installation Manual” for details registering the
lens memory and light memory.
← Select the light memory or lens memory.
← Select the memory name of the setting to overwrite and press the ENTER button to
display the confirmation screen.
Light Select to change the values of the light memory settings.
Lens Select to change the values of the lens memory settings.