NEC NC2041L, Installation Manual

Page: 27 / 108

37
Before Setting Up Your Projector
1-5-2. Removing and Mounting the Side Panel
Preparation:
Phillips head screwdriver (No.2) and Service key (attached goods)
1
Loosen the ten fixing screws on the side panel.
Loosen four screws on the side panel until they are free to spin. The screws do not detach from the panel.
2
Unlock the side panel.
Unlock the cover using the service key.
3
Remove the side panel.
The side panel is fixed in place by hooks at the bottom (in 2 locations). Tilt the side panel toward you and pull up to
remove it. Do not use force when tilting the side panel.
Hook
(2 locations)
This completes removing the side panel. To mount the side panel, perform the removal procedure in reverse. Make sure that
you do not forget to tighten the screws or to lock the key lock.
1-5-3. Removing and Mounting the Filter Cover
Refer to the projector User’s Manual for details on how to remove and attach the filter cover.