NEC NC2041L, Installation Manual

Page: 84 / 108

109
LCD Menu
4-3-5. Installation
This menu is the service personnel menu. For the using service personnel menu, refer to “4-1-1. When You Use the Service
Personnel Menu” (page 100).
Option Slot
Configures the devices mounted in slot. This menu is active in standby mode only.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
IMB Media block (NP-90MS01/NP-90MS02)
No Board No device mounted
Orientation
Set the projection method (Image Orient) to match the installation conditions of the projector and screen. Furthermore, set the
cooling fan operation (Fan Tilt Setting) to match the installation conditions of the projector.
← Select the item and press the ENTER button to display the menu.
Image Orient Set the projection method.
(If you selected “Image Orient”)
←
Displays the currently selected item with asterisk (*).
← Displays the setting.
Normal-F Front projection. With the projector installed on the pedestal, projection is executed from the front
of the screen.
Normal-R Rear projection. With the projector installed on the pedestal, projection is executed from the
back of the screen.
UpsideDown-F Ceiling front projection. With the projector installed on the ceiling, projection is executed from the
front of the screen.
UpsideDown-R Ceiling rear projection. With the projector installed on the ceiling, projection is executed from the
back of the screen.
Lens Type
This function can not be used.
Lens Calibrate
This function can not be used.