NEC NC2041L, Installation Manual

Page: 85 / 108

110
LCD Menu
Lens Center
Shifts the lens position at the center. The center position may slightly shift depending upon mounting conditions of the lens.
This menu item is available only when the projector power is turned on and you are logged into the projector with Advanced
User or higher privileges.
←
Press the ENTER button to execute moving.
Baudrate
To select the transmission speed (bps) for your projector (SYSTEM) and a PC when they are connected by a commercially
available RS-232C straight cable. Select one from 4800, 9600, 19200, 38400, 57600 and 115200. Select the transfer speed
corresponding to the speed of the connected devices.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Date/Time
Use this to set the date and time on the projector.
The internal clock in the projector uses coordinated universal time (UTC). This sets the time difference between the standard
time in your region and UTC.
← Displays the currently setting with asterisk (*).
← Sets the time difference between the standard time in your region and UTC.
Press the ENTER button to check the time difference between the built-in projector clock
and UTC.
TIP
When IMB is used, the date and time of IMB are automatically used as the date and time of the projector (UTC).
When IMB is not used, the use of DCC allows you to easily set the date and time of the projector by reading the
date and time of the computer where DCC is installed.
To set the local time after selecting the Coordinated Universal Time as the date and time of the projector, use
[Date/Time], or use DCC. Refer to “Digital Cinema Communicator v2 Installation Manual” for details.