NEC NC2041L, Installation Manual

Page: 89 / 108

114
LCD Menu
4-4. Title Setup
This menu is the service personnel menu. For the using service personnel menu, refer to “4-1-1. When You Use the Service
Personnel Menu” (page 100).
4-4-1. Preset Button
Use this button to set the titles to be assigned to the preset buttons (<1> to <10> buttons).
You cannot assign the same title to several preset buttons. If you want to assign any title to another number, cancel the assign-
ment once and then set it to any button again.
The “Preset Button 1 to Preset Button 10” settings correspond to buttons <1> to <10> on the control panel. To select the titles
allocated to “Preset Button 11 to Preset Button 20”, press the <1> to <10> button while holding down the <Up> button on the
control panel.
← Select the preset button number (1 to 20).
← Display the selected number of the title.
← Select the titles to be assigned to the preset buttons.
Select the titles from those registered in advance.
To clear assignment to preset buttons, select “---”.