NEC N8141-75F, User Manual

Page: 14 / 107

- xii -
Notes on Installing and Accessing the Rack Cabinet
CAUTION
Do not carry or install the rack only by a single person.
More than one person is required to carry or install the rack. Failure to follow
this instruction may cause the rack to fall and result in personal injury and/or
breakage of surrounding devices. In particular, a high rack is unstable if it is
not fixed by stabilizers. More than one person must always carry or install the
rack while they support it.
Do not install with the load weight distributed unevenly
To avoid unevenly distributing the load of the rack and device, install a
stabilizer or connect multiple racks to distribute the weight. Otherwise, the
rack may fall, resulting in personal injury.
Do not install components on the rack only by yourself.
Two or more people are required to install the rack components such as the
door or rails. When installing the door, make sure that both upper and lower
hinge pins are held in place. Failure to follow this instruction not only may
cause some parts to fall but may also be broken and result in personal injury.
Do not pull out a device from the rack if the rack is unstable.
Always pull out a device from the rack in the state that the rack is made stable
(by the installation of stabilizers or earthquake-resistant construction).
Failure to follow this instruction may cause the rack to fall out and result in
personal injury.
Do not extend more than one device out of the rack.
Extending multiple devices from the rack may cause the rack to fall, resulting
in personal injury. Extend only one device at one time.
When wiring the rack, be sure not to exceed the rating of the power supply.
To prevent burns, fires, and device damages, the power supplied to the power
supply in the rack shall not exceed the rating load of the power branch circuit.
Contact the local power company for the requirements on the wiring and
installation of electric facilities.