English-10
4. Connect all cables to the appropriate connectors (
Figure C.1
). When using a USB cable, connect the B type connector to
the USB upstream port on the rear side of the monitor and the A type connector to the downstream port on the computer
(
Figure C.1a
). If using the cord from a USB device, plug into one of the downstream ports of the monitor.
NOTE:
Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module
and/or shorten the module’s life.
CAUTION:
Do not bind the USB cable. It may cause heat or fire.
Figure C.1a
A Type
B Type
A Type
B Type
Maximum Tilt
DisplayPort IN
USB Upstream (USB Type-B)
Headphone
Highest
Stand
Position
Figure C.1
DisplayPort OUT*
LAN
USB-C
USB Downstream
(USB Type-A)
Power cord
Mini DisplayPort IN
HDMI 1 IN
HDMI 2 IN
SENS/MEM*
*: Remove the SENS/MEM and DP OUT cap when using the connector.
5. To keep the cables neatly and evenly organized, place them into the cable holder which is installed onto the stand
(
Figure C.2
and
Figure C.3
).
6. Please check that you can still rotate, raise and lower the monitor screen when you have installed the cables.
Figure C.3
Power Cord
DisplayPort Cable
Figure C.2
Power Cord
DisplayPort Cable
