English-20
Audio
Audio settings
Source
Selects the audio source: “Active picture”, “Picture1”, “Picture2”.
Volume
Increase or decrease output volume level.
Mute on
Mutes the sound output.
Audio delay
For synchronizing sounds and pictures, delay the audio timing.
USB
USB hub input select
DP1
USB upstream port selection for “DP1”, “DP2 (mDP)”, “HDMI1”, and “HDMI2”. Change the USB upstream port
(USB1/USB2/USB-C) associated with the current display input. When connecting a computer to each of the
upstream ports, the monitor’s USB downstream ports can be used by selecting this setting for the current input
signal. When using only one upstream port, the connected upstream port is active.
NOTE: To avoid data loss, before changing USB upstream ports, ensure that no USB storage devices are in use
by the operating system of the computer attached to the USB upstream port.
DP2 (mDP)
HDMI1
HDMI2
USB-C settings
Power delivery limit
Selects the maximum supplied power for USB-C devices. Normally, use the “20W” setting, but if power charging
does not start or is unstable, try one of the other settings.
NOTE:
- The selection of “15W”, “20W”, or “30W” sets the maximum power wattage that can be supplied to a connected
device. Depending on the type of connected USB-C device, the actual wattage is lower than the selected
option.
- When “15W” is selected, output voltage is fixed to 5V.
- When “30W” is selected, maximum luminance is decreased.
USB-C information
Shows USB-C signal information.
Multi picture
Multi picture settings
Multi picture
When “On” is selected, two pictures are displayed.
Multi picture mode
Selects “PiP” (Picture in picture) or “PbP” (Picture by picture).
Active picture
Selects a target picture for OSD operations.
Side border color
Adjusts the side black bars color.
Position / Size
Position
Sets the active picture location.
Size
Sets the active picture size.
Tile matrix
Tile matrix
Allows one image to be displayed over multiple screens (up to 9).
H Monitors: Select the number of horizontal displays.
V Monitors: Select the number of vertical displays.
Position:
Select a position to expand the screen.
Tile comp: Compensates for the width of the tile bezels in order to accurately display the image.
Enable:
Enables “Tile matrix” settings that you set.