NEC MultiSync PA271Q User Manual Download Page 30

Page: 30 / 34

English-28

Specifications

Monitor Specifications

MultiSync PA271Q

Notes

LCD Module

Diagonal:

Viewable Image Size:

Native Resolution (Pixel Count):

68.5 cm/27.0 inches
68.5 cm/27.0 inches
2560 x 1440

Active matrix; thin film transistor (TFT) liquid crystal
display (LCD); 0.233 mm dot pitch; 350 cd/m

white

luminance; 1500:1 contrast ratio (typical).

Input Signal

DisplayPort:

DisplayPort Connector:

USB-C Port:

Mini-DisplayPort Connector:

Digital RGB
Digital RGB
Digital RGB

DisplayPort V1.1a, 1.2 (HDCP1.3)
DisplayPort V1.1a, 1.2 (HDCP1.3)
DisplayPort V1.1a (HDCP1.3)

HDMI:

HDMI Connector:

Digital RGB

HDMI (HDCP1.4)

Display Colours

1,073,741,824 (DisplayPort/HDMI 10 bit)

Depends on display card used.

Synchronization Range

Horizontal:

Vertical:

15 kHz to 135 kHz
24 Hz to 85 Hz

Automatically
Automatically

Viewing Angle

Left/Right:

Up/Down:

±89° (CR > 10)

Response Time

8 ms (Gray to gray Typ)

Active Display Area

Landscape: Horiz.:

Vert.:

Portrait: Horiz.:

Vert.:

596.7 mm/23.5 inches
335.7 mm/13.2 inches
335.7 mm/13.2 inches
596.7 mm/23.5 inches

USB Hub

I/F:

Port:

Load Current:

USB Specification Revision 3.1 Gen 1
Upstream 3 (incl. 1 x USB-C Port)
Downstream 3
Downstream Port: 5V/0.9A (Max.)
USB-C Port: 30 W (Max.)

AUDIO

AUDIO Input:

DisplayPort Connector:

HDMI Connector:

Digital Audio
Digital Audio

PCM 2ch 32, 44.1, 48 kHz (16/20/24bit)
PCM 2ch 32, 44.1, 48 kHz (16/20/24bit)

Headphone Output: STEREO Mini Jack:

Headphone Impedance 32 Ohm

Speaker Output

Internal Speaker 1W + 1W (Stereo)

Control

LAN:

SENS/MEM Port:

RJ-45 10 BASE-T/100 BASE-TX
USB Color Sensor Port, Memory Port

Power Supply

AC 100-240 V ~ 50/60 Hz

Current Rating

1.5 - 0.73 A (with option)

Dimensions

Landscape:

Portrait:

640.2 mm (W) x 395.7 - 545.7 mm (H) x 233.0 mm (D)
25.2 inches (W) x 15.6 - 21.5 inches (H) x 9.2 inches (D)
378.6 mm (W) x 657.3 - 671.8 mm (H) x 233.0 mm (D)
14.9 inches (W) x 25.9 - 26.4 inches (H) x 9.2 inches (D)

Stand adjustable range Height Adjustment:

Tilt / Pivot / Swivel:

150 mm/5.9 inches (Landscape orientation)
14.5 mm/0.6 inches (Portrait orientation)
UP 30

° Down 5° / 90° / 340°

Weight

9.7 kg (21.4 lbs)

Environmental Considerations

Operating Temperature:

Humidity:

Altitude:

Storage Temperature:

Humidity:

Altitude:

5°C to 35°C/41°F to 95°F

20% to 80%
0 to 16,404 Feet/0 to 5,000 m

-20°C to 60°C/-4°F to 140°F

10% to 85%
0 to 40,000 Feet/0 to 12,192 m

NOTE:

Technical specifications are subject to change without notice.

Summary of Contents for MultiSync PA271Q



































Search results

Summary of Contents for MultiSync PA271Q

Reviews:

Related manuals for MultiSync PA271Q

Brands by name

Popular brands

NEC MultiSync PA271Q, User Manual

Search results

Summary of Contents for MultiSync PA271Q

Reviews:

Related manuals for MultiSync PA271Q

Brands by name

Popular brands