English-32
16:9 MODE:
The screen is displayed with black bands on the top
and bottom. This mode makes a 16:9 picture signal as close as to
an aspect of 16:9 as possible when THROUGH MODE is on.
(The circle is flattened horizontally).
When THROUGH MODE is off, it is recommended to use 16:9.
16:9 picture signal
Screen where a 16:9
picture signal is adjusted
with 16:9 MODE.
NOTE:
• When THROUGH MODE function is set to On, [16:9] cannot be selected.
• When [SCREEN SIZE] is set to [Full], [AV ASPECT RATIO] does not function.
(The picture is displayed over the entire screen).
• When [Side Cut] and [16:9 MODE] are selected, [Real] and [2x Zoom] in [SCREEN SIZE] do not function.
• When [OVERSCAN] is set to [98%] or [95%], [Side Cut] and [16:9 MODE] cannot be selected.
NOISE REDUCTION (For VIDEO1, VIDEO2 input only)
Reduces minute roughness (noise) in the picture. The adjustment bar (0.0% to 100.0%) is displayed.
OFF:
The Noise Reduction function is enabled.
WEAK:
Makes the noise reduction effects weaker.
STRONG:
Makes the noise reduction effects stronger.
NOTE:
Applying noise reduction more than necessary results in a tendency for detailed parts of the picture to
appear blurred.
LEFT/RIGHT (Page 25)
DOWN/UP (Page 25)
I/P CONVERSION (For VIDEO2 input only)
When an interlaced signal is input, the picture data is converted for progressive display. Using this function, it is
possible to select whether to apply three-dimensional I/P conversion when converting the picture data. For pictures
with rapid movement, such as games, there may be cases where movements appear smoother when this function is
set to [OFF] (three-dimensional I/P conversion is not used).
On:
Interlaced signals are converted to progressive signals using three-dimensional I/P conversion.
Off:
Interlaced signals are converted to progressive signals using two-dimensional I/P conversion.
NOTE:
• If the input signal is progressive (D2 (480p), D4 (720p), D5 (1080p)), it is not possible to turn the signal
into interlaced display.
• If an interlaced signal is input for HDMI input or VIDEO1 input, the interlaced signal is converted to a
progressive signal using two-dimensional I/P conversion.
FILM MODE
Pictures with original signals of 24 frames/second, such as DVDs that contain films, etc., are played back in high
image quality.
NOTE:
This function is enabled only when the picture source is interlaced (480i/1080i).
PHASE (Page 25) (For VIDEO1 input only)
Color Control
It is possible to adjust the colors of the screen according to your taste. You can also store the values to which the
ratio of the colors was changed.
1, 2, 3 (For HDMI input only) (Page 26)
N (NATIVE) (For HDMI input only) (Page 26)
HUE (For VIDEO1, VIDEO2 input only)
The adjustment bar (0.0% to 100.0%) is displayed. Move the
button of the monitor in the directions and
adjust the hue of the screen. The color of the screen becomes redder when is pressed and greener when is
pressed.
SATURATION (For VIDEO1, VIDEO2 input only)
Move the
button of the monitor in the directions, and adjust the color saturation of the screen.
Downloaded from ManualMonitor.com Manuals
