English-9
English
Preparation
Caution:
After taking the monitor out of the outer box, place the monitor face-down on
the floor.
Avoid placing the monitor face-up as the screws in the stand may damage the
surface (e.g. table).
1. Lay a soft cloth on an even stable surface and place the monitor face-down on it.
DO NOT block ventilated openings with mounting accessories or other accessories.
TIP:
• Prevent the glass surface and the Control button on the front panel from touching the table or floor surface or
obstacles on the surface. Rest the monitor in a stable position.
Unstable placing may damage the monitor.
• To prevent the glossy surface of the casing from being scratched, do not remove the protective film on the glossy
surface until the monitor is set upright on its stand.
• After the monitor is set upright, remove* the protect film before using.
* Leaving the protective film may cause discoloration or other damage to the glossy surface.
Getting Started
Prohibition
Screws
2. Remove screws and Stand Holder.
A. Remove screws.
B. Remove Stand Holder.
C. Lift the stand until it stops.
Screws
Stand Holder
Underside of the Stand
Control Button
Caution:
• Make sure to hold down the underside of the stand during this operation.
Otherwise the stand may accidentally raise and cause injury.
• Retain the screws and Stand Holder you have just removed as they will be required when re-packaging the
monitor in future.
3. Stand up the monitor.
a. Tilt the stand so that the bottom of the stand is extended outside the LCD panel.
b. Hold the casing and set the monitor upright.
Caution:
Avoid scratching the LCD panel surface with your nails.
Downloaded from ManualMonitor.com Manuals