NEC mPD178053 User Manual Download Page 255

Page: 255 / 271

255

APPENDIX A DEVELOPMENT TOOLS

User’s Manual U15104EJ2V0UD

A.1 Software Package

SP78K0

This package contains various software tools for 78K/0 Series development.

Software package

The following tools are included.

RA78K0, CC78K0, ID78K0-NS, SM78K0, and various device files

Part Number:

××××

SP78K0

Remark

××××

in the part number differs depending on the OS used.

××××

SP78K0

××××

Host Machine

Supply Medium

AB17

PC-9800 series,

Windows (Japanese version)

CD-ROM

BB17

IBM PC/AT compatibles

Windows (English version)

A.2 Language Processing Software

RA78K0

Assembler package

CC78K0

C compiler package

DF178054

Note 1

Device file

CC78K0-L

Note 2

C library source file

Notes 1. The DF178054 can be used in common with the RA78K0, CC78K0, SM78K0, ID78K0-NS, and ID78K0.

2. CC78K0-L is not included in the software package (SP78K0).

This assembler converts programs written in mnemonics into an object codes executable

with a microcontroller.

Further, this assembler is provided with functions capable of automatically creating

symbol tables and branch instruction optimization.

This assembler should be used in combination with an optical device file (DF178054).

<Precaution when using RA78K0 in PC environment>

This assembler package is a DOS-based application. It can also be used in Windows,

however, by using the Project Manager (included in assembler package) on Windows.

Part Number:

××××

RA78K0

This compiler converts programs written in C language into object codes executable with

a microcontroller.

This compiler should be used in combination with an optical assembler package and

device file.

<Precaution when using CC78K0 in PC environment>

This C compiler package is a DOS-based application. It can also be used in Windows,

however, by using the Project Manager (included in assembler package) on Windows.

Part Number:

××××

CC78K0

This file contains information peculiar to the device.

This device file should be used in combination with an optical tool (RA78K0, CC78K0,

SM78K0, ID78K0-NS, and ID78K0).

Corresponding OS and host machine differ depending on the tool used.

Part Number:

××××

DF178054

This is a source file of functions configuring the object library included in the C compiler

package.

This file is required to match the object library included in C compiler package to the

user’s specifications.

It does not depend on the operating environment because it is a source file.

Part Number:

××××

CC78K0-L

Summary of Contents for mPD178053
















































































































































































































































































Search results

Summary of Contents for mPD178053

Reviews:

Related manuals for mPD178053

Brands by name

Popular brands

NEC mPD178053, User Manual

Search results

Summary of Contents for mPD178053

Reviews:

Related manuals for mPD178053

Brands by name

Popular brands