225
CHAPTER 17
µ
PD178F054
User’s Manual U15104EJ2V0UD
17.3.4 Setting example for Flashpro III (PG-FP3)
When writing data to flash memory using Flashpro III (PG-FP3), use the following settings.
<1> Load parameter file.
<2> Select the serial mode and serial cock using the type command.
<3> An example of the settings for PG-FP3 is shown in Table 17-6.
Table 17-6. Setting Example for Flashpro III (PG-FP3)
Communication Mode
Setting of Flashpro III
Number of V
PP
Pulses
Note
3-wire serial I/O (SIO3)
COMM PORT
SIO ch-0
0
CPU CLK
On Target Board
In Flashpro
On Target Board
4.1943 MHz
SIO CLK
1.0 MHz
In Flashpro
4.0 MHz
SIO CLK
1.0 MHz
3-wire serial I/O (SIO31)
COMM PORT
SIO-ch1
1
CPU CLK
On Target Board
In Flashpro
On Target Board
4.1943 MHz
SIO CLK
1.0 MHz
In Flashpro
4.0 MHz
SIO CLK
1.0 MHz
3-wire serial I/O (SIO32)
COMM PORT
SIO-ch2
2
CPU CLK
On Target Board
In Flashpro
On Target Board
4.1943 MHz
SIO CLK
1.0 MHz
In Flashpro
4.0 MHz
SIO CLK
1.0 MHz
Note
Number of V
PP
pulse supplied by Flashpro III (PG-FP3) when serial mode is initialized. This determines the
pin used for the communication.
Remark
COMM PORT: Selection of serial port
SIO CLK:
Selection of serial clock frequency
CPU CLK:
Selection of CPU clock source to be input
