![background image](http://html.mh-extra.com/html/nec/mobilepro-900c/mobilepro-900c_user-manual_248875025.webp)
Getting Started 1-17
Connecting the USB PC Connect Cable
Before installing Microsoft ActiveSync, use the following procedure to
connect the USB PC Connect cable to both your MobilePro and to
your host PC.
1.
Locate and open the USB connector cover on the right side of
your MobilePro.
2.
Align and attach the smaller cable end of the USB PC Connect
cable to the “slave” USB port on the MobilePro.
Locating the slave USB port
A – MobilePro Slave USB Port
3.
Connect the other end of the cable to a USB port on your host PC.
Continue to “Installing Microsoft ActiveSync” later in this chapter.
Connecting to Your PC via Serial Cable
If your host PC is not equipped with a USB port or the USB port(s) is
in use, use the serial port with the optional serial PC Connect cable to
synchronize the MobilePro with your host PC.
Use these procedures to configure your MobilePro for synchronization
using the serial port:
!
Verify the accuracy of the PC Connection default settings on your
MobilePro.
!
Ensure the availability of the serial port on your host PC.
Summary of Contents for MOBILEPRO 900C
