NEC MOBILEPRO 900C, User Manual

Page: 87 / 122

Setting Up a Remote Connection 5-5
Connecting to a Remote Access Server
Once you establish an account with your RAS and gather the necessary
configuration information, you are ready to create a connection on
your MobilePro for your RAS account.
Follow these steps to create a new connection for your RAS account:
1.
Tap Start, Settings, and Network and Dial-up Connections.
2.
Double tap the Make a New Connection icon.
3.
Enter a name for the new connection.
4. Select Dial-Up Connection as the connection type and tap Next.
5. Use the dropdown box to select Internal Modem and tap
Configure.
6.
Select the required port settings and call options. Tap OK.
7.
Tap TCP/IP Settings and configure the required General Settings
and Name Servers. Tap OK.
8.
Tap Next and enter the required dial-up telephone number. Tap
Finish.
Once your RAS connection is established you can configure your
MobilePro to send and receive e-mail through your RAS. Follow the
instructions in “Sending and Receiving E-mail” and “Activating a
Connection,” later in this chapter, to send and receive e-mail through
your RAS.