NEC MOBILEPRO 900C, User Manual

Page: 31 / 122

Getting Started 1-23
Installing Microsoft ActiveSync
You must install Microsoft ActiveSync on your host PC to enable
synchronization with your MobilePro. The Microsoft ActiveSync 3.5
CD that ships with your MobilePro contains the ActiveSync software
designed for synchronization with Microsoft Office components. The
following procedures assume Microsoft Outlook
®
as the host PC
synchronization component.
Configuring a Network Connection
If your host PC is connected to a network, your network connection is
configured automatically when you connect the MobilePro to the
network. If you wish to change the connection, tap Start, Settings, and
Network and Dial-up Connections. Select the appropriate connection
or double tap the Make New Connection icon and configure your new
connection.
Note
If you need to configure a new connection, do so before
installing Microsoft ActiveSync.
Installing ActiveSync
Use the following procedure to install Microsoft ActiveSync for
synchronization with Microsoft Outlook. The installation sequence
might vary depending upon the Microsoft components installed on
your host PC.
Note
If your host PC uses the Windows NT
®
operating system, you
must install Windows NT Networking before installing Microsoft
ActiveSync on your host PC.
1. Insert the Microsoft ActiveSync 3.5 CD in the CD-ROM drive of
your host PC.
!
If auto-insert is enabled on your host PC, the setup window
appears.
!
If auto-insert is not enabled, go to Start, Run, browse for the
CD-ROM drive, and run the setup.exe file.