NEC IT2510, Operation Manual

Page: 401 / 466

NEC IT Series Issue 1
NEC IT3510/IT2510 Operations Manual 6 - 37
3.2 Password Reception
When a receive password is set, a document will only be received when both
sending and receiving ends have matching passwords. This feature can be
used to filter out junk facsimiles.
Necessary registration:
The Group Password must be registered in advance. Refer to Section 2.11
Registering Passwords for Secured Communications in Chapter 3
Registration and Setting Operations on page 3-31.
Before Starting Operations:
The sender’s facsimile must be registered with the same group password as
registered in the IT3510/IT2510. Depending on the sender’s make and model of
facsimile, password communication may not be possible.
Manual Reception Procedure
1.
When the telephone rings, press
<FAX/MAIL> and then pick up
the handset to speak to the
caller.
2.
After talking, press <Start>
when you hear facsimile tones
through the handset.
3.
Replace the handset in its
cradle.
i
A "beep" sound is heard when
reception is completed.
i
To continue talking after
receiving a document:
You can resume talking to the caller
after reception is completed if both
sides leave their handsets off the hook.