NEC IT2510 Operation Manual Download Page 293

Page: 293 / 466

NEC IT Series

Issue 1

NEC IT3510/IT2510 Operations Manual

4 - 19

2.4

Copy Settings

The various settings for the Copy mode are described in this section.

Copy Settings

Mixed Original Detection Priority:

Sets whether the Mixed Original Detection mode is set as the default.
The factory default setting is OFF.

Setting for the Activity Report:

1. Touch [Activity Report].

2. Select [Output ON] or

[Output OFF] for
automatic printing, then
touch [Enter].

Setting the Memory Clear
Report:

1. Touch [Memory Clear

Report].

2. Select [Output ON] or

[Output OFF] for
printing the report, then
touch [Enter].

Confirm the setting details
when the screen returns to
that shown in step 2. Touch
[Enter] if they are correct.

To modify:

Touch the key for the items to be
modified to change the setting.

Touch [Enter] repeatedly until
the display returns to the
stand-by screen.

Report Setting (Continued)

Summary of Contents for IT2510



















































































































































































































































































































































































































































































Search results

Summary of Contents for IT2510

Reviews:

Related manuals for IT2510

Brands by name

Popular brands

NEC IT2510, Operation Manual

Search results

Summary of Contents for IT2510

Reviews:

Related manuals for IT2510

Brands by name

Popular brands